Power |
AC200V~260V(50Hz) /AC90V~130V(60Hz) (Optional) Single-phase |
|||||
Control Mode |
half cycle primary voltage variation compensation |
|||||
single cycle primary voltage variation compensation SINGLE CYCLE |
||||||
Multi cycle of compensating voltage fluctuation MULTI CYCLE V |
||||||
Multi cycle secondary constant current MULTI CYCLE A |
||||||
Time Setting |
a. Squeeze time (SQ):00~99(cycle) b. Up slope 1: 00~99 (included in the welding time) c. Welding time 1:00~99(cycle) d.Down slope 1:00~99(cycle) e. Cooling time::00~99(cycle) f. Up slope 2: 00~99(Cycle) g. Welding time 1:00~99(cycle) h. Down slope 2 :00~99 (included in the welding time) i. (HOLD):00~99(cycle) j. (PUL):1~9(order)Multiple-pulse k. Current set:10.0%~99.9%(voltage variation compensation)/0.20-9.99KA(constant current) |
|||||
MAXIMUM OUTPUT CURRENT |
0.50~9.99 KA Maximum Output Current |
|||||
MONITORING INTERVAL |
00.0~10.0 (cycle) |
|||||
MONITOR SCHEDULE |
Current |
0.00~9.99 KA (OVERRUN-.-- KA )OVERRUN-.-- KA )-.-- KA ) |
||||
Conduction Angle |
000~180 deg |
|||||
Good count |
00000000~99999999 count good weld only |
|||||
Input power frequency |
45~60Hz |
|||||
No Detection Set |
00.0~10.0サイクル (cycle) |
|||||
Current/Voltage Detection Precision |
Full Range±3% |
|||||
COMMUNICATION SET |
PRINTOUT SET |
You can set the serial communication output. |
||||
BAUDRATE SET |
You can choose the baud rate from 9600, 19200, 38400, 57600, 115200 bit. |
|||||
The use of the environment |
Temperature5~40℃、Humidity90% below(no dew) |
|||||
Consumed Power |
20W (no welding ) |
|||||
MAXIMUM OUTPUT POWER |
20KW (duty factor13% AC220V) |
|||||
Matching |
The current detection coil |
|||||
Dimension |
240(H)×163(W)×230(L) (Without projecting parts) |
|||||
weight |
5.5kg (no accessory) |
|||||
Bình luận